SPECIFICATIONS

Parameters-388LED Lamp

LED Beads quantity: 388LED
Battery Capacity: 1800mAh 3.7V Lithium Battery
Solar Panel：5.5v/1.3w
Color Temperature: 6500k cold light
Sensor Method：PIR sensor
Charging Time：8-10 hours by bright sunlight
Working Hours：Induction 150 times Housing
Material ：ABS +PC+polycrystalline
Solar panel's Working Temperature： -25℃ to 65℃
Net Weight: 0.35kg

3 Working Modes

Mode 1: Middle Brightness Mode, keep steady on at night, atuo power off during the day.

Mode 2: Dim light Sensor Mode, no motion lights keep dim brightness, motion detected lights turn to strong light (full brightness) for 20-25s and back to dim light afterwards.

Mode 3(Recommended): Sensor light Mode, The light is off when there is no movement, full brightness when motion is detected for 20-25s and then back to off afterwards.

Attention

When the battery is completely discharged, the solar lamp may not light up after a short charge or charge on cloudy days, the solar lamp must be exposed to direct sunlight for at least 2-3 days to restart.

FAQ

Qusetion : Why does the solar light can not work ?
Answer : Please check the following items.
1.Confirm switch is on or not.
2.To maximum battery capacity, the solar sensor light should be charged by direct sunlight at least for eight hours before initial use.
3.To ensure the normal working of light detector, please install it away from other light sources.
4.Confirm whether it is being continuously used in a long-term and no charge,recharge it timely before use again.
5. Confirm installation direction is correct(solar panel should be facing up).
6.Confirm no objects blocking it and solar panel can receiving sunlight. ---please do not install the light too close to another light, it will effect the light work.